{\rtf1\ansi\ansicpg1252\deff0\deftab720{\fonttbl{\f0\fswiss MS Sans Serif;}{\f1\froman\fcharset2 Symbol;}{\f2\fswiss Tahoma;}}
{\colortbl\red0\green0\blue0;}
\deflang1033\pard\plain\f2\fs20\cf0 Class: Part of S/D's coding structure
\par Class#   Class ID
\par 3            Aircraft
\par 4            Soldiers
\par 6            Vehicals
\par 7            Air Defences
\par 8            Ground Forces
\par 9            Buildings
\par 11          Projectile
\par 12          Explosions
\par 13          Smoke
\par 18          Fire
\par 21          Tree
\par 
\par 4/23/99-Halved smoke X,Y,Z's and set 173 from 5 10 15 20 25
\par 
\par Type: This is an ID code for the object (Hence 0906xxxx is a class 9 (building) type 6 (church).
\par 
\par Damage: In most cases probably too low.
\par 
\par Dot Color: Might be equal to one of the pallet colors, dot seen at extream range.
\par 
\par DX-DZ: Sets "target box" for item in question. Multiple entries for items with more then one 3d object.
\par 
\par Ranges: Distance in feet by which the detail setting for the object is visible, testing shows that only the MAX Range needs to be increased to get the graphics up on the screen at long range. Dot Range deals with a longer range where the Dot (with color from above is visible).
\par 
\par Dist & Multiplier: No clue! May effect image scaling?! Haven't had the time to mess with this.
\par 
\par SHX, Y, Z's: May have set the shadow box for RB2. Not sure if it's functional now in 3D.
\par 
\par Shadow: 1=yes 0=no.
\par 
\par Flamable: 1=yes 0=no
\par }
 