high detail early Fokker DVIIF 170hp BMW.
Based on an updated version of my 185hp DVII. Different nose, other manifolds and exhaust pipes.

I maintained the original S/D bitmap system. This zip contains adapted bmps for the standard early German DVII,made by DeltaK.
To fly this plane, you'll need some additional parts of FPSPP.zip.

***painting issues***

I made some changes in the texture positioning of the fuselage. 
First: the bottom line. It's always difficult to obtain a sharp edge between the side and bottom painting. I have found a solution to this. Just below the bottom line of the sides, I ignore a 2 pixel line and then use the next line for the bottom. This makes the positioning of the bottom line less critical and gives a very sharp edge.
Second: the lozenge pattern on the top of the fuselage. In normal conditions this is almost impossible. But I use a new trick: I wrap the bitmap around the top (only the section behind the cockpit). And I do it linear, so you don't get an effect of narrowing spots.
Third: I use the same technique for the engine. The engine bitmap - sides and top - is included in the fuselage bitmap.

If you study the dml-file, you'll notice the mtstr2.bmp is used twice: for all struts and for all other metal parts. This gives you the opportunity to paint the struts without painting all other metal parts.
The sides of the axle wing are painted with the left bottom pixel of the fuselage bmp. (similar as POYD)


18/09/2001
Charles de Thielt


