| The Automag
click a pic to see a larger image | |
The AutoMag. Looking at this thing the project feels more like a rescue. |
Taken apart. |
The important bits. |
The important bits reassembled. |
Side-by-side. |
Size and position studies. |
Showing where Mag rail and body will likely be cut. Rail will also be made narrower. |
|
|
Looking down both tubes. So close! but the receiver will have to be reamed ever so slightly for the Mag to fit inside. |
Valve placed in ABS plastic M16A2 upper receiver. |
Valve placed in ABS plastic M16A2 upper receiver. |
Ball feed will be at front of ejection post. |
|
| BACK
January 29, 2008 |
|
